Quote:
Originally Posted by hamza
So I thought this was sorted… garage changed the air bag on the passenger side front a few weeks ago…
Unfortunately it looks like the driver side looks an inch to two or so lower than the passenger side .. so might need to change that too? Odd thing is though, the button to change the ride height isn’t doing anything, it’s not pumping the driver side back up to match when the car starts or anything either.
When I press the button to raise the ride height it just flashes away and nothing happens. No errors on the dash either though.
Any ideas?
|
Scanner situation? You need to read the sensor values and compare. Also; check the lever arms. E53 are notorious for the joints rusting and the arm no longer moving correctly. I've seen them bent like a banana.
Also: the front sensor arm is known to flip to the wrong side at the elbow. Not sure if that's possible on the back. I would check to make sure all arms are the correct orientation.
(The sensor lever needs to be mostly horizontal the arm to the lever mostly vertical)