I dunno, may be the wrong direction... I did some mroe digging in the TIS...having doubts


seems that 58g may only be a signal that tells 'the dash lights are dimmed to this value'... this signal is distributed to a TON of modules: door hadle, dvd drive, oddments compartment, etc



In order for this to be your issue, somehow the CCC must be seeing this value, it is 'wrong', but then somehow causes the CCC not to behave properly.


So Im not sure. One thought- perhaps disconnecting the pin/wire to the CCC? If it fixe/changes the behavior, that might be a hint?


Sry...