I checked for codes with my Foxwell 520 pro. The only relevant two were under Body, 41 ZKE Central body electronics:

- 59 GM Central-locking drive, driver's door, open circuit

- 94 GM: LED for anti-theft alarm system, open circuit

I cleared them and they haven't come back so far.

I tried the live data option for the Central locking system (ZV):

Driver's door: Closed
Passenger door: Closed
Driver's door lock barrel: Off
Central locking button: OFF
Status of the central locking button: IMMOBILIS

So it thinks both front doors are closed. Even when I opened the doors, the FOXWELL doesn't change state. I tried both simply opening the door while in the Live Data screen and opening the doors and doing a scan again.

As far as I can tell, there isn't an individual fuse for the driver's door lock. I see F20 (30A) for the Driver door module above the glove compartment.

Is there a diagram of the wiring harness for the driver's door? I have the circuit diagram, but want to make sure all the connectors are seated properly.

Any other ideas?

Thanks!

I see this on realoem, but it doesn't show where the connectors run:

https://www.realoem.com/bmw/enUS/sho...diagId=61_1314