I spent several hours yesterday and today putting a floor into the spare tire well, since I don't have a spare that will fit that area. My first choice would have been a 10 or 15 gal aux fuel tank, but since that isn't in the cards, I can definitely use the space for additional storage in the X when I've got my dogs in the back. I carry a Thule box on top, but more storage is always better.
My goal was to have a flat and stable floor that would protect all the wiring and air suspension plumbing. I opted to go with two pieces of finish ply, that I would later join together. The two halves were much easier to transfer all the cut-outs needed to clear the various bits and pieces sticking up in the spare tire hole. Once I got the initial dimensions correct and ply cut to match, it was simply trial and error...measure, cut a little test fit...rinse and repeat.
After getting a good fit, I joined the pieces together with some 2x4 material ripped to create a good base, front and back, cleaned the edges and applied some self adhesive weather stripping to any spots that could rub, bounce, etc. and make noise. I had some old exterior grade rug/mat material laying around so I trimmed it up to (almost) fit. Eventually I'll do something more permanent and a better fit, but I want to live with it a while and see what may need tweaking.
The air spring compressor takes a lot of room obviously, and eventually I'll go with springs perhaps, when it fails, but I do like the ride the air shocks in the back give and I can tweak my ride height (When INPA works for me, unlike now!)
I'll live with it a while and then eventually make some brackets to secure the stuff I end up storing back there, and traveling with so it doesn't rattle around. Things like the air compressor, tool kit, fluids, breaker bar and deep well socket I need to get my wheels off, platform for the factory jack so it will go high enough to get the wheels off, etc. Oh, and the custom sticks I use to secure the windows when the F-ing regulators/clips fail far from home! I do like the way the bracket for the chocks fits perfectly back in its spot with the floor in....I wish I could say I planned it that way...