Quote:
Originally Posted by ahlem
If you have Harbor Freight, I'd get an air needler and buzz at it for a while to get anything loose out of there. An air chisel with a narrow chisel might be useful as well. Do you have a sand blaster? Oxyacetylene torches?
|
We don't have HF here but something similar called Princess Auto.
Personally I do have a small hand held sand blaster I was thinking on using.
A Dremel with a small wire brush to clean the threads up as much as possible was going to be my starting point and work my way up from there.
Unfortunately I don't have torches at my disposal but I will be using some MAPP gas to give some heat before attempting to remove the nut.