Quote:
Originally Posted by X5chemist
Tighten the sway bar links. I had a similar issue hundreds of miles after a suspension rebuild. Using an impact is not enough. You need a hex socket and closed end wrench to tighten them. Plus, you have to have the correct load to find a loose one. I tried looking for the knock on level ground. Ended up using ramps and a good size crow bar to find one was loose.
|
* One of the things that I love about the Meyle HD swaybar endlinks is that an impact IS enough to tighten them. Even after they've been on for a while and removed and replaced. But this applies to the rest of them.