View Single Post
  #219  
Old 08-18-2023, 09:39 AM
Henn28's Avatar
Henn28 Henn28 is offline
Member
 
Join Date: May 2021
Location: Louisiana
Posts: 1,145
Henn28 is on a distinguished road
Not sure how much lift you are looking for but 1.5 to 2 inches tops is about all you can get without throwing the front permanently out of whack. The Fluid Motor Union kit I have is 1.5” and the front struts are positioned all the way inboard at the top mount cutouts, which just barely keeps the front camber in spec. The cutouts on the strut towers are all we have for limited front camber adjustment. You could elongate them more, and reinforce the towers a bit, but that seems like a lot of work for an car with 3 open differentials that will never be an off road beast without a ton of money and hard labor, and I wonder too if the law of unintended consequences would throw something else out of whack in the suspension geometry.

Those are 30mm (1.1 ish inches) soyou could go a bit taller, but 2” is probably the max, if you want to be able to align front on the stock suspension bits.

As far as material, I’d look for aluminum too. The FMU kit is aluminum and has given me zero durability issues. Put new bilsteins in the back a few months ago and everything looked good, and I’ll report back when I do the front struts at some point in the next few months.
__________________
Current
Original owner 2002 E53 X5 4.4i to 4.6i swap
2026 G80 M3 6 spd
2025 G06 X5 50e
Former
1972 Audi Fox
1986 Saab 900S
1996 BMW Z3
1998 BMW E36 M3 Sedan
2004 BMW E46 M3
2006 Audi A3 Quatro
1993 Mopar 318 Jeep Grand Cherokee
2015 V6 Jeep Grand Cherokee

Last edited by Henn28; 08-18-2023 at 09:45 AM.
Reply With Quote

Sponsored Links