To pull the hub you first must push the CV axle out. You can makeshift a push tool using things like pipe flange and 3/4" bolt. If you find the right size flange your can hold it to the hub with the lug bolts and washers.

Once the CV is out you can use a slide hammer rental to knock off the hub. (or some longer 14-1.5 bolts and a piece of scrap behind the hub to push against the knuckle but that will destroy the dust cover. (Which I usually replaced when doing getting bearings).

__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)