Quote:
Originally Posted by andrewwynn
if you notice the video you sent back, the clicking is on the Fixed one, so it is not in the gears that Sound is in the motor. I believe the motor comes with the pinion gear and that should solve your issue.
|
Yes, the noise is from the motor, but the motor is still spinning trying to spin the shaft/gears. So my motor is to weak to spin the shaft, it tries to and that’s when it makes the noise?
Yes, a new motor comes complete ready to install. I got a new motor today.
So if the shaft has a tiny bit of wear like the one shown in the video, it is still good?
I got a new motor today, if I plug in the new motor to the wire harness and try to calibrate it, will it calibrate or not since the motor pinion gear isn’t driving anything?
I am ordering a new valve cover gasket and new metal plate gaskets that go under the fuel injector housings.
I did not get a chance to change the oil today. I am still holding out that an oil flush and change may clean the oil feed tube to the gears and clear the error.
Thanks.