View Single Post
  #16355  
Old 12-18-2023, 09:48 AM
LA02MAX LA02MAX is offline
Member
 
Join Date: Jun 2021
Location: Covington, LA
Posts: 133
LA02MAX is on a distinguished road
Quote:
Originally Posted by Salty B. View Post
Well that was a fail. The unit powers up but the new screen stays dark. So either I f'd up those fragile-ass ribbon cables or it's a bad unit. Probably the former. Those ribbins are evil... I've reseated the two that come out of the assembled faceplate and connect to the main unit. One of those had been mangled a little and the white tab came unglued. I got it back in as far as I can tell with a little flashlight. Maybe it's the other one connecting the screen to the board...

Gonna run it dark for now, I don't have it in me to take it apart again... what a pain in the ass!

Anyone got a scrap one? Doubt I can buy new ribbon cables anywhere.

edit: I found the copper-colored ribbons on ebay: https://www.ebay.com/itm/264953104853

But if the one that goes from the LCD to the board is broken, well, that one seems to be unobtanium.
My guess is that one of the ribbon cables popped loose at some point, or was never secured during your installation. I did the same replacement and the ribbon cables are very finnicky, and I remember having to backtrack for some reason, and noticed one had popped loose (before testing, thank goodness). I believe I used a pair of tweezers to shove the ribbon cables into place and I just lightly pushed at different points along the back side of the connector until I was sure everything was snug.
__________________
__________________

2006 X5 4.8is
Reply With Quote

Sponsored Links