Quote:
Originally Posted by 80stech
You need to make sure that you are looking at RH drive P/N if that is what you have. I would take the door card off and recheck your work and connections, if that is all good then try tapping on the actuator while trying to work it.
|
Ok fella fair point will try to source the part to have handy, from what i recall i never touched the actuator/door lock when doing the door handle carrier fix, and the issue started to manifest a couple of months after on and off so does make you think if you have done something wrong.....i just did the st.steel zip tie fix on the thing and put it back in, tore the moisture barrier but sorted that out with aluminum tape , and as I said the cable gave me a bit of grief but that was user errror.....and slooowly the drives side sometimes locked sometime didnt....