View Single Post
  #84  
Old 12-08-2024, 05:32 PM
workingonit's Avatar
workingonit workingonit is offline
Member
 
Join Date: May 2021
Location: DFW Texas
Posts: 1,137
workingonit is on a distinguished road
if it ain't broke, why remove it....

I've only had my X for 3.5 years, but I've gone thru three wiper blades/arms in that time. The first one's rubber was failing and the arm was loose, so I bought one off Amazon. It never made good contact with the glass, so I tried the E70 blade/arm.

Problem there, too, with contact, but it was better, so I left it on for about 1.5 years, before it got bent down by my semi-feral cats on the property. I re-tightened it several times, using Loctite or epoxy, and lastly with a setscrew, but the inner splines on the arm (made from cheap pot-metal were gone.

So, I reinstalled the older Amazon E53 arm (I keep old stuff for emergency spares), super-glued and super-tightened it, and it lasted a very short time before the cats bent it down, several times. It too became stripped-out.

I was about to order a cheap Amazon wiper delete kit, but I knocked over my box of rubber vacuum caps, while working in the trunk. I tried a couple on the wiper arm post, and decided to just glue one on it (to protect the splines, which were still OK). Good enough for me, since I or the next owner might decide to try installing another wiper in the future (me, if the semi-feral cats move on, or a future owner...if any...decides to use it). Cost= $0.11, USD.
__________________
01 BMW X5 E53,3.0i-5L40E, 7/13/01
topas-blau,Leder-grau,"resto-project car"

Here:
14 Lexus ES350,3.5L-U660E
09 HHR Panel,2.2L-4T45E
04 Chevy 2500HD,6.0L-4L80E
98 GMC Sierra 1500,5.7L-4L60E

Gone:
66 Chevelle Malibu 2dr ht.,327>441c.i.-TH350>PGlide/transbrake
08 Cobalt Coupe,2.2L-4T45E
69 & 75 C10s,350c.i.-TH350
86 S10,2.8L-700R4
73 Volvo 142,2.0L-MT4
72 & 73 VW SuperBeetles,1.6l-MT4
64 VW,1.2l-MT4
67 Dodge Monaco 500 2dr ht.,383c.i.-A727
56 Chevy 210 4dr,265c.i.-PGlide
Reply With Quote

Sponsored Links