Stripped the pealing black paint from my exhaust tips and repainted. I don't think I prepped properly last time. This time I did for sure. Completely stripped the old paint, wire brushed, sanded and scotch brited everything. Applied high temp primer (2000 degree). Applied high temp flat black. Final coats were gloss black BBQ paint. Hopefully it will hold up this time.

Finished my head light restoration as well. That's been a three week project. First sanded and buffed everything out, shot them with 2K gloss and then gave the clear a sanding with 800 grit to remove the orange peal. Followed by 1000 and 3000 then buffing with compounds and polishes. Took a while but they're looking like new and the 2K should keep them looking that way for quite some time.