|
Well I did the BPR treatment today. Four hours idling with a can in the crankcase. Blipped it every thirty minutes. After four hours I drained the oil and pulled the filer. Then pulled the plugs and put BPR in each cylinder. It still in there. In the morning I'll drain out any BPR that may have gone past the rings. Hopefully pulling more carbon out of the rings. The oil I drained was very black. Once I clear any fluid left on top of the pistons I'll stick the plugs back in and put fresh oil in. I lifted up the right side to level out the piston tops as much as possible. See photos.
|