Quote:
|
Originally Posted by MrLabGuy
Looks like this if I'm correct.
#4 is a ground
#5 goes to the foot well
#7 goes to the ECU which is just a power on switch when the key is in the #2 position.
Yes you connect the ballast to the wire shown. You will need wire connectors (best to use a removable connector) and make sure Brown goes to Brown and Red to Red.
How is that...And I've not installed mine yet.
|
Just to elaborate. The footwell connection is so your new eyes illuminate when you hit the remote button upon entry. The ECU you will need to look for a 12V power on when the key is turned to the on position. Any 12V should do that is switched.
Hope that helps.
I've been doing my homework.