HI Spiffy

This has been discussed before. The problem is that the input is AV i.e. Audio and video. If there is no video signal it blanks the screen and mutes the audio to avoid damage. If you pull the jack out slightly it puts a bit of signal to the video and sometimes works but the screen is all the time trying to sync. I did get it working using a proper AV lead (left right video and ground) but again you have to put a signal on the video channel. There also seemed to be problems with some AV leads and you had to fiddle about with them.

Hope this helps to explain but unfortunately does not work. You have to get an AUX in.

John