|
Radiator Flush job
1. Open Radiator cap
2. Loose Radiator hose from left front driver bottom.
3. Remove drain plug from left side engine (you have to remove your front right wheel and also turn your wheel to all the way left to get to this nut).
4. reconnect Radiator hose and drain plug.
5. Put in the Flush fluid and fill up the with water hose.
6. Let engine runs for 10 mins with Max heat 90 degrees.
7. Wait for the car cool down.
8. Redo above steps 2, 3, and 4.
9. Mix 50% radiator fluid with 50% Distill water.
10. Approximately 7 - 8 galons.
|