Yeah it is an easy job. In the front wheel well on the splash guard you will either have air vents or, the air vents could have covers. If they are covered just take the cover off. Inside one of the air vents (I think passenger side for UK, drivers Side for USA) you will find the sensor. It should have a long tail as I call it. Just un-plug and plug in the new one. What I actually did on mine was disconnecting the sensor and clean up the plugs with electrical cleaner and emery board. Once I reconnected everything was working again!!

__________________

Quote:

Do Not Go Where The Path May Lead, Go Instead Where There Is No Path & Leave A Trail