Quote:
|
Originally Posted by BabyMakingWeather
The Nav unit should still continue trying to boot off CD, even if the installed software is now trashed.
So burn a new CD-R, using high quality media, and at the slowest possible speed as the current one obviously couldn't be read. I also recommend you also use a different software version such as v27.0 or v28.0
If the CD won't eject, then leave for a few hours and try again, otherwise remove the power to the DVD unit (blue cable) and press Eject repeatedly as you re-apply power.
Start all over again with the new CD. Don't turn the power off when it starts updating.
Good luck
|
Rubbish!!! Switch the ignition ON then hold your finger on the "EJECT" button while you hear the CD/DVD unit whirring. It may take up to 30 seconds or so -but the CD/DVD
WILL eject! There is absolutely no need to p**s around with removing power cables!!!!!!
BMW has some of the finest automotive engineers on the planet. Unfortunately, all finite instructions are only available in German - they have a lesson to learn there - but Germans don't understand that most of their customers understand English.........
