Quote:
|
Originally Posted by driverX5
I read this in the manual and tried it, and I pulled the handbrake quite high, and still did not get the car to stop.
|
Then try and adjust the cables. You will need 2, 10mm open end wrenches. Pull off the leather boot that covers the handbrake lever. You will see 2 cables with 10mm nuts, and 10mm stop nuts. Loosen the stop nut and turn the lower nut clockwise. As you do this on both sides, make sure that you have not tightened too much, by checking to see if the X rolls freely. When done, tighten the outer lock nuts.