View Single Post
  #5  
Old 01-02-2007, 02:43 AM
KiwiJochen KiwiJochen is offline
Member
 
Join Date: Dec 2006
Location: Switzerland
Posts: 2,575
KiwiJochen is on a distinguished road
Quote:
Originally Posted by jammykam
I've not had any luck with this unfortunately. My first port of call was to fix the broken system, so I loaded a v22.1 disk (unmodified) which brought it back to life.
v22.1 would have been Mode2/Form1

Quote:
Originally Posted by jammykam
I then tried it with a v23 modified disk and so far no luck. I wasted a few disks cos I'd burnt it wrong. I noticed you can create a mode2 cd using Nero, but that one didn't work either.
Probably has wrong TOC. You need correct TOC for nav to recognise CD.

Quote:
Originally Posted by jammykam
When you used mode2cdmaker, I assume you used something like UltraIso to extract all the files, modified the usw_load file and then 'dragged & dropped' to the mode2cdmaker gui.
Correct.

Quote:
Originally Posted by jammykam
If I drap&drop the iso, it just makes another image with an iso in, not the files.
Of course. You tried to make a image with one .ISO file :-)
Don't make an image of an image.

Quote:
Originally Posted by jammykam
I assume after the '-f' you had a whole bunch of other stuff there as well.
-f means file name. every file has the -f in front of it. The GUI makes the command line for you.

Quote:
Originally Posted by jammykam
When going up from v22, do I need to go down to something lower (to less than software 3-1/63, i.e. v21) and then back up again. Or should using a v23 disk cause it to reload? Reason I ask is because v23 has the same software 3-1/63 on it as well.
If you have 3-1/63 loaded, then it won't load anything newer.
I made my modified OS CD v3-1/64, to ensure it would be loaded.
Or just give it the wildcard 00 version (3-1/00) and it will load regardless.

Quote:
Originally Posted by jammykam
It's weird cos when the mk3 was dead, it did exactly what you said and the disk would not eject. With the new disks it just spits them straight back out again, so i assume i am doing something wrong in burning the disk.
Wrong TOC. Nav system looks for certain files in the Table Of Contents (TOC). Thats what the modified mode2cdmaker does, it writes the correct TOC.

Regards, Jochen
Reply With Quote

Sponsored Links