That is really odd that your A1400 and Stealthbox is that loud. I had to ADD power to get it to come alive. Can you remind us where you tapped the speaker level inputs from? You don't have 80hz cranked in the DSP EQ by chance, do you? Also, make sure your bass in the tone settings is flat or negative, bass boost is OFF on the A1400, the low pass (LP) filter should be on, and the LP frequency should be around 60hz+-. You might want to readjust your input sensitivity control and input voltage setting (high).

One other thing... if you are somehow running that amp in some configuration below 4 ohms you might want to change that.

The A1400 is a great amp so I hope you can get this worked out by tweaking your setup.

__________________
Custom X Page | Support Xoutpost!