Quote:
|
Originally Posted by dmlgc
..... But after reading this thread it sounds like I wire the bridged 85/87 wire to brown wire and 86 to Yellow/white ?
At this point since there is mention of frying electronics I'm inclined to not do this and just mark it up as lesson learned.
|
Correct. Powers1 is giving you good info. Pins 85+87 connect to reverse-light-ground (brown) and cam ground. I just crimped two wires together for this and connected them to the 2 grounds. Pin 86 connects to reverse-light positive (yellow/white) and cam positive.
Here's more that may help
cam install 1 cam install 2
You can do it
