Glad it worked for ya,
The cable in the photo is the cell booster. I don't use this on my X5.
I saw a significant increase in signal strength. Make sure you connected the correct antenna cable to the eject box.
mgruber: Call Crevier and order the part from them. I'm not aware of the part number being updated. I didn't need anything else. I did order an antenna adapter (mini dongle), but didn't end up needing it. I
Quote:
|
Originally Posted by jditom
Well Jeff's DIY was pretty great. It took me about 2 hour with a lot of goofing off. The only thing I did different was to also loosten the rear exhaust mount (the one closer to the engine) on the left side. This loweres the exhaust about an inch and it was easier to get the wire in the hole. The I put the exhaust back up before putting the plates in.
I found a 3 prong wire running with the antenna wire. Anyone know what it's for? Do I have the right antenna wire? It is the only one I found down there but I must say I did not see a real increase in signal strength.
 |