Quote:
|
Originally Posted by KiwiJochen
Odd . all the Mk1/2/3 setting does is prevent you from setting Check Arrival Time, it forces the value to 0
I don't understand why it worked for you that way.. but anyway well done
|
When I used the MKI/II/III mode I checked the box for the arrival time, this set the command byte to x06. I then unchecked it and set the mode to MKIV, the byte was then set to x02. If you leave the box checked and change the mode to MKIV the byte stays as x06. I believe switching the bit back and forth did the trick. It would be interesting to be able to read the config from the ibus to see what the bit is set to.