Quote:
|
Originally Posted by crosvs
also: is the CROSSOVER FREQUENCY the frequency ABOVE which no soudn will go to the bass? E.g., if it's set to 100 Hz, then it means the sub will get everything BELOW 100, right?
|
Correct, setting the crossover frequency at 100Hz means that you're letting everything below 100Hz pass, but only if you tapped into the "right" lines (the woofer speaker). If you mistakenly tapped into the "mid" or "high" speakers, then it may explain your lack of bass since those have high-pass crossover out of the OEM amp. Also, play with your gain adjustment on the sub's amp as well as the "bass-boost".