I don't blame DICE for this - all I did there was to plug in the 3 and 6 pin connectors. What I think I blew was sinking screws into the carpert under the driver's seat. My [very] bad. Thought about "what lies beneath," but figured with my short screws and the thick underfloor padding my chances were good. I'll check the battery first- it does seem low on juice. What seems screwy is the Xenons flashing on and off rapidly when I turn the ignition, like something's haywire.

Of course this comes at a time when I'm absolutely buried at work and trying to set things straight to go on vacation for two weeks. I really don't have time to get a tow to the dealer and wait for results. Anyway, thanks for the help. I'm putting up my numbskulled move so everybody else thinks about it during their install. From now on- velcro tape on the back of the DICE module.

I'll remove seats and inspect tonight. Thank god there's a large carpet seam right at that location, hopefully it will make this job a little easier. I need easy right now.

As PS, what positions should the dip switches be on the DICE module to get full functionality on the nav screen (2001, non-DSP, nav)? The DICE instructions confuse me.

PPS - Where's the emoticon for tearing hair out?