**UPDATE**

Well, here is what I found (Mainly for anyone else who may see this post in the future):

1. There are three pumps on the resevoir; in the back, there are both the rear washer and front windshield washer pumps. Looking in from the front of the car, the rear is on the left and the windshield pump is on the right. On the driver's side of the resevoir, is the much larger headlamp pump, for the cars with the cold weather package, I believe.

2. Both the front windshield pump and the headlamp pump are shot. They sporadically run, get very hot, and don't pump any water.

3. The filters were slightly plugged, but the pump lines were very plugged. It took a good blast of 100 psi air from my compressor to clear them. I believe that the lack of water flow may have damaged the pumps.

3. The rear and front windshield pumps are interchangeable, and this is how I am able to at least have washers for my front windshield for this weekend, while I wait for replacement pumps.

4. While the local AutoZone has a TAAP model #5-861 replacement for the windshield or rear that looks like it will work ($13), they have no part number for the headlamp washers.

Regards,

Gary