Reach behind the bumper to remove the reflector. I used two screwdrivers
about 18 inches long.(That was all I had)

You get a plug to cover the reciever opening but that is it.
The opening is not to bad except for the shiny mufler that can be seen
from a distance. Will ask the dealer if it can be painted black without altering the heat disapating properties.

If you need a hitch, there is no choice unless you come up with something
that fits the receiver opening and covers the cutout.

Drawtite/Hiddenhitch products will be installed the same way as the BMW
hitch.

I have one picture I can post now. Not a good angle though.