Quote:
|
Originally Posted by Zulu95
The slip ring needs to be changed or they cannot plug in the 2 wire harness for the heater. There should be a fuse at position 29 and a green relay installed. No reprogram required. The dealer should be able to do this as we owners worked it out a long time ago!
Check out this article:
http://xoutpost.com/pdf/Heated%20wheel%20retrofit.pdf |
What would cause Fuse 29 to not show any power with the ignition switch on in the #2 position, the run position? I pulled the fuse and checked it and i had nothing on either post for the fuse.
