:xoutpost:

I believe that you can use any amp that has speaker level inputs w/o a LOC. For the 15 pin connector, 4 of those wires are for your speaker level out to get the signal to your amp. If your amp has these outs, it should be able to handle the input from those wires. Not sure if there is a remote wire coming from the head unit, but some amps have a signal detection circuit that detects when there is signal going to your speaker level inputs, so you might not need a remote. I didn't do the install myself, but I'll check to see where they tapped the remote wire (even though they probably didn't need to do that). That box with all the red wires coming out is where I would recommend tapping for power. Don't know what the silver box is, but your dsp amp is in the left compartment under the nav and changer location. I think you should be able to get the taps at radio shack, but not sure.