Quote:
|
Originally Posted by 2002Silver4.6is
This is from mounting instructions for PIaa horns. Note number 3: - Do not remove or alter the screw or the bracket on the backside of the horns. Doing so may alter their performance or may disable them.
- Install the horns so the open end with the cover points down.
- Do not install and wire the PIAA car horns so they work with the factory installed horns. Doing so may overload the circuit or may not pass local noise regulations.
I guess if you start blowing horn fuses you will have to disconnect the stock horns. |
Ouch taking that bumper off again?? PITA if you ask me
__________________
2002 4.6is Dinan S2
Titanium Silver/Black Alcantara
DINAN
Stage 4 Engine Software
Automatic Transmission Software
High FlowThrottle Body
Free Flow Exhaust
Cold Air Intake System
High Flow Air Mass Meter
OTHER
CCFL Angel Eyes
Stealth XM Radio in ashtray : FM Mod
Pilot H3 Fog Bulbs
Cleared Headlights: Hi/Lo Beams
Hardwired Radar Detector
IN PROGRESS
Powerstop C/D Rotors: (on backorder)
W/EBC Red Stuff (F)
W/Axxis Deluxe (R)
Dice Ipod: Aux Input for XM
THINKING
SMG II
MK4
Bluetooth
|