Quote:
|
Originally Posted by TheTallMan
What kind of effort level are we talking about for the installation...?
If I didn't go with the full package (change all the speakers), which are the key ones to change out to get better sound, or do they all really need changing?
How do you figure out which speakers will fit? Is there any dimension info for the factory speakers around, so I can make sure any new ones I buy will fit and are the correct impedance?
Also you mentioned that speakers would be louder if the new ones are lower impedance. I will probably not take a chance on that, will just match the ratings on the new and old speakers. Question is, what are those ratings?
Thanks to people who responded.
TTM
|
With our BSW Stage 1 the installation takes a bit of time but is not "hard". We provide step by step color installation instructions along with the stage. This is on top of being able to call and get tech support if you run into any problems.
The speakers are in an "enclosure". If you had to put a size on them it would be ~6" speaker for midbass and about a 5/8 tweeter. The midrange in the dash up front is 2.5".
Our stage 1 does not just "get louder". The impedance is properly matched and sometimes just a touch higher than the stock speakers. This is made up for in efficiency. The "loudness" most people refer to would be that if with your oem speakers you can turn it up to 15 clicks before it sounds terrrible... now you can turn it up to 18,19 or 20. You can listen at a higher volume level because of the increase in sound quality and the lack of distortion at lower volume levels.
Let me know if you have ANY additional questions!