Quote:
|
Originally Posted by rogerkiu
Today I bought all tools that needed to replace control arm, then started to work. After I jacked up my car, took off the wheel and started to unscrew the nut that connects to sub-frame, I found that the screw was not 18mm, which is said in the instruction in the home page, I found that the screw was 16mm. Since I did not buy 16mm socket, so what I had to do was to put the wheel back on and lower the car. I will go out to buy 16mm socket tomorrow, and re-start the work. It really sucks.
|
Why not just buy the whole set of sockets?
The time and gas money for running back and forth are more likely to cost you more in the end. Besides that, you're more than likely to use most of those sockets anyway if you plan on doing other works (either around the house or on the car).