Thnx Jochen now i know where to start!

I followed this instructions:

Use a v22 OS.
Replace all files:
csb 0100 BMWM01S
with:
cdb 0100 BMWC01S
you must include subdirectories.

Replace:
cdb 0200 BMWM01S
with:
cdb 0200 BMWC01S

Replace:
Mk3 0103 BMWM01S
with:
Mk3 0103 BMWC01S
Do the same thing with directories 0116 y 0127.
You must include subdirectories.

Delete the following directories:
langMk2
Mk2C
Mk2m
V_2

IMPORTANT: Create the image, use the procedure related by KiwiJochen on the following thread:
http://www.xoutpost.com/246230-post14.html


I replaced this files and subdirectories with magiciso like you said
Then i burn the image with imgburn and in the program it says mode2, but when i put in the disc it spins a verry long time (20min or longer) and i have a hard time to get the disc out!
When i let navcoder scan, the unit its not detected.
Then i put in an v29.1 disc, the procedure works fine and navcoder detects the unit again.
I modified v19 v22 several times but always get the same problems.
Any suggestions?
I think its the writing because several people told me this looks like a problem when you put mode1 disc in a mk3 unit

Regards

Joël