Quote:
|
Originally Posted by y5choi
Okay, You need to take your car in for service. So far I had no problem what so ever with my E70 4.8. Camera/ pdc works in within 1second of putting in reverse. Steering wheel moving for getting in and out also works perfectly everytime.
|
Here is what I noticed:
If the car is cold (first thing this morning)...when I get in and start it up the BMW screen stays for about 10-12 seconds before the acknowledge screen comes up.
Once I exit the vehicle and get back in and restart, the screen comes up instantly. But if i waint 30 + minutes and restart the car I get the BMW screen and delay again.
This is very consistant and has been like this since I bought the vehicle in Feb 07. I have had the X5 reprogrammed 2-3 times as the software updates have been released and the delay has not changed.
I dont know what the dealer can do about this, I think its pretty typical for the sytem to initalize and boot up after a shutdown.
I dont think the OP's issue is the camera coming on w/i one second of engaging reverse, its the initial cold start boot up time. I cant imagine you guys are not experiencing this as well...pay attention when you start the car first thing in the morning. This should be consistant with everyone.
Once the system is booted, YES the camera will switch on instantly when you engage reverse...BUT, you must allow the system to boot-up when first starting. Honestly you shouldn't start your car in the morning and slam it into reverse...wait 10 seconds and let the oil circulate before engaging into gear.
BTW- It is exactly the same regardless of bluetoooth or not.