Good call.....but read on...

I found that one of the clips had broken on the air filter cover so it was sucking too much air there so I just used a screw to secure it tightly. Now I am sure that it is tight. It is not sucking too much air around the filter. When I did that I also got some MAF cleaner and cleaned the MAF just to be sure. I just get the codes listed now -- nothing on the MAF.

I talked to a friend and he said it could be a vacume problem....sucking too much air through some source or vacume hose and the sensors in the exhaust are reading that the mix is not right in the exhaust so that is why I am getting the codes. Since it is on both sides it would seem that it is some sort of air problem. But I wouldn't know where to start looking for a vacume hose crack or problem. Any suggestions.