Quote:
|
Originally Posted by bmwjack
Hello, From Scotland , and as I have read some interesting posts  on your site, on how to fit sat nav/systems and as I have a 1999 E46 323i se BMW and trying put a rover/landrover sat nav system into it, if it is possible, I am hoping you guys would help me out on a few things . |
BMW is documented much more extensively than Rover.
You should read the correct Nav Retro-fit instructions for your car, and compare your Rover parts with the original BMW parts.
Here's some notes:
Wiring loom - good, you have what appears to be the right loom
4:3 Monitor - this is a Rover part number. IT will most likely physically not fit the dash of an E46 - buit I cannot say for sure.
Tuner - you state " Tuner/gps/cd changer control & receiver etc" - these are 3 separate devices: Tuner, GPS receiver, and CD changer. What are you trying to describe? Your post is confusing
Rover Nav - I think this is a MkIII nav. It is loaded with rover software so will show a Rover splash screen when starting up
You also need the brackets, and a GPS antenna. Refer to the retrofit instructions to determine what parts you do not have.