View Single Post
  #131  
Old 11-24-2007, 12:33 PM
alexank's Avatar
alexank alexank is offline
Member
 
Join Date: Nov 2005
Location: Ellesmere Shropshire UK
Posts: 51
alexank is on a distinguished road
Hi Jochen I thought I would give you an update re your latest version and my Rover, last time I was getting comms errors and could not do anything with it However the latest version things look better but there are some odd side effects.

A scan of my car provides this (I have DVD nav, dual tuner BM24, 16:9 screen and TV tuner all from an E46)

Audio / Nav System scan conducted 24/11/2007 15:49:52

Following devices were found and are communicating:

BMBT On-board monitor:
Part number 6 934 409, version HW 59, SW 49, made by Alpine on 43/03 (October 2003)
Diagnostic index 51, Bus index 11, Encoding index 00

MFL Multi-function steering wheel:
No identification data available for this device


GT Graphics driver:
Part number 6 983 312, version HW 10, SW 80, made by VDO on 26/06 (June 2006)
Diagnostic index 06, Bus index 14, Encoding index 07

NAVE Navigation:
Part number 6 983 312, version HW 10, SW 80, made by VDO on 26/06 (June 2006)
Diagnostic index 06, Bus index 14, Encoding index 07

RAD Radio:
Part number 6 933 455, version HW 03, SW 29, made by Becker on 47/04 (November 2004)
Diagnostic index 16, Bus index 12, Encoding index 01

CDC CD changer:
No identification data available for this device


TV Video module:
Part number 6 923 268, version HW 06, SW 16, made by Loewe on 51/02 (December 2002)
Diagnostic index 02, Bus index 13, Encoding index 02


The following devices did not respond:
They are either not fitted, not turned on, or not communicating on the I-bus.
MID Multi-info display
FMID Rear multi-info display
IRIS Integrated radio information system
DSP Digital signal processor amplifier
TEL Telephone




Side effects are all the time I have Navcoder running the Bordmonitor screen is blank and can not be used, to correct this requires disconnecting the laptop and cycling the ignition and sometimes a battery off reset

Trying to read the nav settings sometimes causes a comms error

The shareware version obviously does not let me code the TV tuner so I have no idea if that will work

when I disconnected my laptop I noticed my TV tuner came back to life with German menus!

Now this is talking to my car I am interested in coding MG rover units with the BMW firmware did you get the Rover OS CD I sent you?
__________________
Keith Alexander
Rover 75 CDT Connoisseur Se, MG ZT+T 190, MG ZT 260
Ellesmere Shropshire England

Sponsored Links