Quote:
|
Originally Posted by UKenGB
Try emailing them on [email protected], you will probably be able to get the info you want.
I have just heard from AudioControl that the 6XS (my active crossover) CAN accept the +5/-5 balanced feed from the BMW radio module, so I don't need any LOC there at all, which is good news. Unfortunately, as you pointed out, the 6XS output will be a bit high for the Nakamichi amps. Although the 6XS does have output level controls, there is a real danger of these being accidentally set too high. Is there a simple way to attenuate/limit the 6XS outputs without needing multiple LOCs? Or will I just have to rely on maintaining the correct adjustement?
What would happen to the Nakamichi amps if their input signal was too high? |
No way to limit the output that I am aware of without LOC's. But, there are 4-channel LOC's, so that seems like it shouldn't be too much of an issue.
Are you set on the 6XS? If not, I'd look for another active crossover that meets the needs of your Nak...
If you send a signal that is too high to the Nak you will burn out the input stage, which is to say that you will be sending it in for expensive repairs.
d-