Quote:
Originally Posted by Jaycee
Thanks H, very useful.
Looking at the mock up of the finished item, the wires look a little short for my use as a flylead, have you shortened them to a length that suits your final requirements
|
No, its just a mock up, it was just to give an idea of what it would look like.
Quote:
or is that the maximum length of the wires?
|
The total wire length is around 12" so it's fairly long.
Quote:
In the bags they look much longer.
|
They are, see above.
Quote:
This will give me an idea whether or not to buy an extra 3 x 663 (female pins & wires) and extend one of the leads a little further, i.e. solder the bared end of each wire into the female pin of the previous wire.
|
Looking at all the bits I got, you should have no trouble doing what you need with what comes, the wires are well long enough.
This should be all you need
2 x male plugs
1 x female plug
6x female pins (one on each wire)
3x male pins (one on each wire)
It should be a bit cheaper than mine too.
HTH
__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.
|