Originally Posted by raguilar

Ok, here are the steps that I took.

1. replaced ULF module (hooked up to 54 pin and bluetooth antenna)
2. turned off wifi on Iphone
3. put Iphone in "search for devices"
4. held down the pairing button in X5
3. held pairing button for 5 seconds and then inserted key into ignition.
4. turned key to second place
5. still holding pairing button for 5 seconds and released
6. car displayed "pairing ??????" forgot the word
7. on phone entered in the pairing code, 4 digits
8. car beeped and then 3 lights kept flashing yellow, red, yellow on top right of navigation screen, well in the corner, not on the screen but on the unit above the buttons.
9. screen said pairing.
10. turned off car and restarted, after flashing for about 1 minute
11. phone paired with X5, telephone text on nav monitor is now visible.
12. car does a beep
13. about 30 seconds later, the bluetooth icon on the Iphone goes away and then starts to flash again. It is reconnecting up with the ULF module.
14. it continues to do this. the phone book is never transfered.
15. I go to the phone directory and it has no numbers in it, it then will go back to the screen where you would select the telephone. I think that the phone disconnects and then reconnects and the car looses connection.

I have done the same pairing procedure with a Motorola Razr and it connects up the same. When I turn off the X5 and then on again, it pairs up just fine and works great. The phone book transfers and I can make calls and receive with no issues. I just can't seem to get the Iphone to stay connected long enough to work.