Quote:
|
Originally Posted by rangerfan
Don't think there is power going to the eject box, but I might not be properly using the multineter. played around with the fuses, and reseated the 3 fuses having anything to do with the telephone. Regardless, the snap in doesn't work. I installed the BT setup, including the eject box and the snap in, myself. I ordered all of the parts, including the snap in, from Crevier in California. I am in Connecticut. If I bring the X into my local shop to troubleshoot this, will they fix it for free or will they charge me since I installed it all myself (and removed Assist in the process)?
|
There should be 12V DC power on the cable that connected up to the eject box unit. If you aren't getting power out of the cable that extends from under the console then you definately have a problem.
Check and see if you have power as follows:
Pin 2 = Brown (GROUND)
Pin 5 = Red (12v +)
or
Pin 17 = Ground
Pin 10 = 12v +