Quote:
|
Originally Posted by Scuba
Kiwi, "red/yellow" power as well? I tried to use "green/red"...... Unsuccessfully, but in my case I'm not sure in efficiency of the interface.....
|
On your white 12p connector (which is X400, the telephone loom connector)
Pin 1 = Terminal 30 (permanenet battery power) from fuse F57 (red/green)
Pin 4 = ibus (white/grey/yellow)
Pin 5 = Terminal 58G, illumination (green/red)
Pin 7 = ground (brown/black)
You cannot power the ibus from the illumination signal, as this is a PWM signal, and will drive the interface crazy :-)