Quote:
|
Originally Posted by rangerfan
I'm not really sure what you are saying. What is "the charger side pin that is connected to the red wire"?
The eject box is wired like this:
Pin 1 Green
Pin 2 Brown
Pin 5 Red
Pin 13 White
Using the multimeter I can confirm that I get power at Pin 5 w/ Pin 2 ground.
*sigh*  |
There are two connectors that you are putting together, right? One that came in the car (the car side), and one that you are adding with the eject box (the charger, OR eject box side). The pins on the eject box side need to line up with the appropriate pin receptacles on the car side.
So, you said you are pairing fine, in which case don't touch the green or white wires. That leaves you with brown and red. Brown is easy, attach it to ANY pin receptacle on the car side that is also brown - there should be two... just pick one, and move the pins on the eject box side to line up with it.
Regarding the red wire on the eject box side.... Check the pin receptacles on the car side and find 12 volts... you should find at least 1. Again, line up the pin on the eject box side to line up with the appropriate pin receptacle on the car side.
cjett