To properly adjust your e-brake shoes;
1.remove one lug nut from both rear wheels
2.jack and the support the rear end of your car
3.position the hole from the removed nut at 3 o'clock for passenger side and 9 o'clock for driver side
4.peer into the void and locate the adjuster
5.set parking brake to second click
6.take a flat head screw driver to turn the adjuster through the lug nut hole until you cannot move the wheel by hand.
7. Repeat on opposite side.
8.Release e-brake and apply to first click, double check to see wheels still move in first click position of the e-brake.
9.Re-install and Re-Torque lug nuts.
10.done!