|
A standard oil sample test will only show dissolved solids. If you want to test for visible particles you would need to order a large particle analysis, or particle count, test. It is usually an additional cost, approximately equal to the original sample. If the oil is fairly new, you won't get much information from a simple oil analysis.
A side question: What will you do as a result of the oil analysis? If you are not planning to tear the engine down based solely on the sample, then save your money and don't do one.
If it is running fine and not knocking, I suggest you leave it alone and thank the engine gods that nothing was harmed. Not much point in changing the oil again, as anything in the oil will be taken out by the filter. If anything, you should change the filter again, cut the old one open, and look for particles. When you change the oil next time, you should always have the hood open and be watching when you start it up. That is because of potential oil drain plug leaks, filter leaks, fill caps left off, and so on.
__________________
2007 X3 3.0si, 6 MT, Premium, White
Retired:
2008 535i, 6 MT, M Sport, Premium, Space Grey
2003 X5 3.0 Steptronic, Premium, Titanium Silver
2002 325xi 5 MT, Steel Grey
2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue
|