Quote:
|
Originally Posted by josh256
Sure,
In a BT/Visteon install I'm not sure whether the first/only antenna should be at the front or rear.
There's the purple connector in the arm rest.
There's four antenna jacks in the back:
- White: fits ULF perfectly
- Blue: doesn't fit ULF (grooves are staggard at 180')
- Purple (both female and male connectors, already connected to each other - grooves are not identical to ULF but can be forced)
The confusing part is that the front seat connector is purple. My assumption is that leads to one of the rear purple connectors, neither of which were available (without disconnecting them from each other), and neither of which fit the ULF perfectly (grove pattern was slightly off, but worked).
Thanks,
Joshua
|
With the Visteon module you get a separate ULF antenna cable that conects to the ULF module at one end, and the ULF antenna at the other end (small square box loking thing). The male/female purple connectors in the back are supposed to be connected thus utilizing the car's internal antenna. The purple fakra connector up front conects to the fakra connector in the eject box if you get one, thus completing the circuit to use the car's internal antenna.. Does that make sense?