I installed an HID kit from Dave at
www.angelibrite.com this past summer...also h3......you have to get rid of all the old wiring...gut it out....you will never use it again..or at least I will never utilize mine again now that I have gone to the h3 HID set up!! This pic reflects 4500k..I actually had Dave send me 8000k to match the headlights he sent me....remove all the old wiring in the projector..I pretty much cut it out and removed it.....I also carefully drilled holes about the size of a quarter in the caps that cover the back of the projector housing......slowly fed the h3 bulb through and then used the plugs on the wiring to secure into the quarter sized hole....screwed tha caps back on and all secure...I hope this helps..RR
