Xoutpost.com - View Single Post

Essam Khafagi · #18 12-13-2008, 12:19 PM

OK, I found out how to upgrade from a link on the home page.

1. Go to your vehicle and turn the ignition switch to the first position. Let the navigation system boot up and get into a normal operating mode.
2. Leaving the system on (never turn the power off during these steps!!), go back and eject the navigation CD from your drive unit.
3. Put in the V "XX" disk into your drive unit. Watch your screen and be patient. It will take about 6 minutes to do the upgrade. When it’s done it will eject the CD automatically. (note: for MKIII systems that are on version 17 or lower, the system may ask you to insert the Key CD. If so, insert the KeyCD and then follow the on-screen instructions. THIS ONLY APPLIES TO THE MKIII)
4. Put your navigation CD back in the drive and make sure everything is working properly.

My questions are:

- I found that the links for V31 and V32 are not working, can someone give me a working link

- Is there any special considerations to put the downloaded file on a CD?

- I have a very old version, and accoding to the article I might be asked for a Key CD. I do not have this CD! what is the solution?

Thanks for your help!

Sponsored Links

Sponsored Links